Our experts are here to help

    Technical information

    • Installation:Indoor/Outdoor
    • Rated load:750 lbs
    • Power supply:115 VAC/25A/1 PH, 230VAC/15A/1 PH (not available for Hydraulic)
    • Speed:10 FPM (20 FPM for Accelerated Acme and Hydraulic)
    • Min headroom:80"
    • Lift pit:3" pit or 0" with Access Ramp
    • Drive system:Standard Acme Screw, Accelerated Acme Screw, or Chain Hydraulic
    • Max travel:168"
    • Max number of stops:4
    • Lift controls:Constant Pressure (Hold to Run)
    • Motor Power:1 1/2 HP (3 HP for Hydraulic)
    • Machine room:Self Contained
    • Door configuration:Same side, Straight Through, 90 Degree, 3 Opening
    • Directives and standards:ASME A18.1

    Main advantages

    Entry/exit configurations

    Entrance/exit configurations include straight-through, 90 degrees, same side, and three openings.

    Hold-to-run controls

    The control button must be pressed and held for the elevator to work.

    Lift sizes & floor cut out information

    Downloads

    Shaftway Lift.pdfDownload
    Symmetry VPL Design Guide.pdfDownload
    Specification: Shaftway Lift.docxDownload
    VPL Commercial Applications.pdfDownload
    Symmetry Shaftway – 90 degree FXL – TL – 36″ x 54″.pdfDownload
    Symmetry Shaftway – 90 degree – TL – 36″ x 54″.pdfDownload
    Symmetry Shaftway – SS – TL – 36″ x 54″.pdfDownload
    Symmetry Shaftway – SS – TL – 36″ x 60″.pdfDownload
    Symmetry Shaftway – SS – TL – 42″ x 60″.pdfDownload
    Symmetry Shaftway – ST – TL – 36″ x 48″.pdfDownload
    Symmetry Shaftway – ST – TL – 36″ x 54″.pdfDownload
    Symmetry Shaftway – ST – TL – 36″ x 60″.pdfDownload
    Symmetry Shaftway – ST – TL – 42″ x 60″.pdfDownload